Configuring Zero Field Check On Ripng Packets; Configuring The Maximum Number Of Ecmp Routes; Displaying And Maintaining Ripng - HP 6125G Configuration Manual

Configuring zero field check on RIPng packets

Some fields in the RIPng packet must be zero, which are called "zero fields". With zero field check on
RIPng packets enabled, if such a field contains a non-zero value, the entire RIPng packet is discarded. If
you are sure that all packets are trustworthy, disable the zero field check to reduce the CPU processing
time.
To configure RIPng zero field check:
Step
1. Enter system view.
2. Enter RIPng view.
3. Enable the zero field check.

Configuring the maximum number of ECMP routes

Step
1. Enter system view.
2. Enter RIPng view.
3. Configure the maximum
number of ECMP routes for
load balancing.

Displaying and maintaining RIPng

Task
Display configuration information
of a RIPng process.
Display routes in the RIPng
database.
Display the routing information of
a specified RIPng process.
Display RIPng interface
information.
Reset a RIPng process.
Clear statistics of a RIPng process.
Command
system-view
ripng [ process-id ]
checkzero
Command
system-view
ripng [ process-id ]
maximum load-balancing number
Command
display ripng [ process-id ] [ |
{ begin | exclude | include }
regular-expression ]
display ripng process-id database
[ | { begin | exclude | include }
regular-expression ]
display ripng process-id route [ |
{ begin | exclude | include }
regular-expression ]
display ripng process-id interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
reset ripng process-id process
reset ripng process-id statistics
199
Remarks
N/A
N/A
Optional.
Enabled by default.
Remarks
N/A
N/A
Optional.
8 by default.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view