HP 6125G Configuration Manual page 286

route with a VPN instance, so that the static routes of different VPN instances can be isolated from each
other.
To configure static routing between MCE and VPN site:
Step
1. Enter system view.
2. Configure a static route
for a VPN instance.
3. Configure the default
precedence for static
routes.
Configuring RIP between MCE and VPN site
A RIP process belongs to the public network or a single VPN instance. If you create a RIP process without
binding it to a VPN instance, the process belongs to the public network. By configuring RIP
process-to-VPN instance bindings on a IPv6 MCE, you allow routes of different VPNs to be exchanged
between the MCE and the sites through different RIP processes, ensuring the separation and security of
VPN routes.
For more information about RIP, see Layer 3—IP Routing Configuration Guide.
To configure RIP between MCE and VPN site:
Step
1. Enter system view.
2. Create a RIP process for a
VPN instance and enter RIP
view.
3. Enable RIP on the interface
attached to the specified
network.
4. Redistribute remote site routes
advertised by the PE.
5. Configure the default cost
value for the redistributed
routes.
Command
system-view
•
ip route-static dest-address { mask | mask-length }
{ gateway-address | interface-type
interface-number [ gateway-address ] |
vpn-instance d-vpn-instance-name
gateway-address } [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
•
ip route-static vpn-instance
s-vpn-instance-name&<1-6> dest-address { mask |
mask-length } { gateway-address [ public ] |
interface-type interface-number
[ gateway-address ] | vpn-instance
d-vpn-instance-name gateway-address }
[ preference preference-value ] [ tag tag-value ]
[ description description-text ]
ip route-static default-preference
default-preference-value
Command
system-view
rip [ process-id ] vpn-instance
vpn-instance-name
network network-address
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost |
route-policy route-policy-name |
tag tag ] *
default cost value
276
Remarks
N/A
Use either command.
Perform this
configuration on the
MCE. On a VPN site,
configure a normal
static route.
Optional.
60 by default.
Remarks
N/A
Perform this configuration on the
MCE. On a VPN site, create a
normal RIP process.
By default, RIP is disabled on an
interface.
By default, no route is redistributed
into RIP.
Optional.
0 by default.