HP 6125G Configuration Manual page 67

Figure 22 Hello packet format
0
Version
Major fields of the hello packet are as follows:
Network mask—Network mask associated with the router's sending interface. If two routers have
•
different network masks, they cannot become neighbors.
HelloInterval—Interval for sending hello packets. If two routers have different intervals, they cannot
•
become neighbors.
Rtr Pri—Router priority. A value of 0 means the router cannot become the DR or BDR.
•
RouterDeadInterval—Time before declaring a silent router down. If two routers have different dead
•
intervals, they cannot become neighbors.
• Designated router—IP address of the DR.
Backup designated router—IP address of the BDR.
•
Neighbor—Router ID of the neighbor router.
•
DD packet
Two routers exchange database description (DD) packets, describing their LSDBs for database
synchronization. A DD packet contains only the headers of LSAs to reduce traffic.
7
1
Checksum
Network mask
HelloInterval
RouterDeadInterval
Designated router
Backup designated router
15
Packet length
Router ID
Area ID
Authentication
Authentication
Options
Neighbor
Neighbor
57
AuType
Rtr Pri
31