HP 6125G Configuration Manual page 56

LD/RD SourceAddr
6/3 192.168.1.1
# Display routes destined for 100.1.1.0/24 on Switch A.
<SwitchA> display ip routing-table 100.1.1.0 24 verbose
Routing Table : Public
Summary Count : 2
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.2.2
BkNextHop: 0.0.0.0
RelyNextHop: 192.168.1.2
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active GotQ
Tag: 0
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.3.2
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Inactive Adv
Tag: 0
When the link over VLAN-interface 100 fails, Switch A quickly detects the link state change.
# Display the BFD information on Switch A.
<SwitchA> display bfd session
Switch A has deleted the BFD session on VLAN-interface 100 to Switch C and displays no output.
# Display the RIP routes of RIP process 1 on Switch A.
<SwitchA> display rip 1 route
Route Flags: R - RIP, T - TRIP
P - Permanent, A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------------------
The output show that the RIP route learned from Switch C no longer exists.
# Display routes destined for 100.1.1.0/24 on Switch A.
<SwitchA> display ip routing-table 100.1.1.0 24 verbose
Routing Table : Public
Summary Count : 1
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
DestAddr State Holdtime Interface
192.168.2.2 Up
Process ID: 1
Cost: 1
QosLcId:
Interface: vlan-interface 100
BkInterface:
Neighbor: 192.168.2.2
Label: NULL
BKLabel: NULL
Age: 00h00m47s
Process ID: 2
Cost: 2
QosLcId:
Interface: vlan-interface 300
BkInterface:
Neighbor : 192.168.3.2
Label: NULL
BKLabel: NULL
Age: 00h12m50s
Process ID: 2
Cost: 2
QosLcId:
46
1700ms vlan100