HP 6125G Configuration Manual page 107

[SwitchD-ospf-1] area 0
[SwitchD-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[SwitchD-ospf-1-area-0.0.0.0] network 10.3.1.0 0.0.0.255
[SwitchD-ospf-1-area-0.0.0.0] quit
# Configure Switch E.
<SwitchE> system-view
[SwitchE] ospf
[SwitchE-ospf-1] area 0
[SwitchE-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[SwitchE-ospf-1-area-0.0.0.0] network 10.4.1.0 0.0.0.255
[SwitchE-ospf-1-area-0.0.0.0] quit
[SwitchE-ospf-1] quit
Configure BGP to redistribute OSPF routes and direct routes:
3.
# Configure Switch B.
[SwitchB] bgp 200
[SwitchB-bgp] peer 11.1.1.2 as 100
[SwitchB-bgp] import-route ospf
[SwitchB-bgp] import-route direct
[SwitchB-bgp] quit
# Configure Switch C.
[SwitchC] bgp 100
[SwitchC-bgp] peer 11.1.1.1 as 200
[SwitchC-bgp] import-route ospf
[SwitchC-bgp] import-route direct
[SwitchC-bgp] quit
Configure Switch B and Switch C to redistribute BGP routes into OSPF:
4.
# Configure OSPF to redistribute routes from BGP on Switch B.
[SwitchB] ospf
[SwitchB-ospf-1] import-route bgp
# Configure OSPF to redistribute routes from BGP on Switch C.
[SwitchC] ospf
[SwitchC-ospf-1] import-route bgp
# Display the OSPF routing table of Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 8
Destination/Mask
10.1.1.0/24
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
11.2.1.0/24
11.2.1.2/32
127.0.0.0/8
127.0.0.1/32
Routes : 8
Proto Pre Cost
O_ASE 150 1
O_ASE 150 1
O_ASE 150 1
O_ASE 150 1
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
97
NextHop Interface
11.2.1.1 Vlan100
11.2.1.1 Vlan100
11.2.1.1 Vlan100
11.2.1.1 Vlan100
11.2.1.2 Vlan100
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0