Applying The Qos Policy; Displaying And Maintaining Pbr Configuration - HP 6125G Configuration Manual

Step
9. Associate the class with
the traffic behavior in the
QoS policy.

Applying the QoS policy

When configuring PBR, you can apply a QoS policy to the following occasions:
Applied globally—Affects the traffic sent or received on all ports.
•
Applied to an interface—Affects the traffic sent or received on the interface.
•
Applied to a VLAN—Affects the traffic sent or received on all ports in the VLAN.
•
NOTE:
A QoS policy used for PBR applies only to traffic received on all ports, on an interface, or on all ports in
a VLAN.
To apply the QoS policy globally:
Step
1. Enter system view.
2. Apply the QoS policy
globally.
To apply the QoS policy to an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Apply the policy to the
interface.
To apply the QoS policy to a VLAN:
Step
1. Enter system view.
2. Apply the QoS policy to
VLANs.
NOTE:
QoS policies cannot be applied to dynamic VLANs, for example, VLANs created by GVRP.

Displaying and maintaining PBR configuration

Command
classifier tcl-name behavior
behavior-name
Command
system-view
qos apply policy policy-name global inbound
Command
system-view
interface interface-type
interface-number
qos apply policy policy-name
inbound
Command
system-view
qos vlan-policy policy-name vlan
vlan-id-list inbound
294
Remarks
N/A
Remarks
N/A
N/A
N/A
Remarks
N/A
N/A