HP 6125G Configuration Manual page 164

Step
1. Enter system view.
2. Enter BGP view.
3. Create an EBGP peer group.
4. Specify the AS number for the
group.
5. Add the peer into the group.
NOTE:
Do not specify any AS number for a peer before adding it into the peer group.
•
• All of the added peers have the same AS number as that of the peer group.
To configure an EBGP peer group using Approach 2:
Step
1. Enter system view.
2. Enter BGP view.
3. Create an EBGP peer group.
Specify an AS number for a
4.
peer.
5. Add the peer into the group.
NOTE:
Peers added in the group can have different AS numbers.
To configure an EBGP peer group using Approach 3:
Step
1. Enter system view.
2. Enter BGP view.
3. Create an EBGP peer group.
4. Add a peer into the group
and specify its AS number.
Command
system-view
bgp as-number
group group-name external
peer group-name as-number as-number
peer ip-address group group-name
Command
system-view
bgp as-number
group group-name external
peer ip-address as-number
as-number
peer ip-address group
group-name [ as-number
as-number ]
Command
system-view
bgp as-number
group group-name external
peer ip-address group
group-name as-number
as-number
154
Remarks
N/A
N/A
N/A
N/A
The AS number can be either
specified or not specified in the
command. If specified, the AS
number must be the same as that
specified for the peer with the peer
ip-address as-number as-number
command.
Remarks
N/A
N/A
N/A
N/A