Configuring Ospfv3 Gr - HP 6125G Configuration Manual

----------------------------------------------------------------------
Neighbor ID
1.1.1.1
2.2.2.2
3.3.3.3
Restart DR and BDR election:
4.
# Use the shutdown and undo shutdown commands on interfaces to restart DR and BDR election.
(Details not shown.)
# Display neighbor information on Switch A. Switch C becomes the BDR.
[SwitchA] display ospfv3 peer
----------------------------------------------------------------------
Neighbor ID
2.2.2.2
3.3.3.3
4.4.4.4
# Display neighbor information on Switch D. Switch A becomes the DR.
[SwitchD] display ospfv3 peer
----------------------------------------------------------------------
Neighbor ID
1.1.1.1
2.2.2.2
3.3.3.3

Configuring OSPFv3 GR

Network requirements
As shown in
OSPFv3 routing domain are GR capable.
Switch A acts as the GR Restarter. Switch B and Switch C are the GR Helpers and synchronize their LSDBs
with Switch A through out-of-band (OOB) communication of GR.
OSPFv3 Area ID 0.0.0.0 (Process 1)
Pri State
100 Full/DROther
0 Full/DROther
2 Full/Backup
OSPFv3 Area ID 0.0.0.0 (Process 1)
Pri State
0 Full/DROther
2 Full/Backup
1 Full/DROther
OSPFv3 Area ID 0.0.0.0 (Process 1)
Pri State
100 Full/DR
0 2-Way/DROther
2 Full/Backup
Figure 80, Switch A, Switch B, and Switch C that belong to the same AS and the same
Dead Time Interface
00:00:33 Vlan100
00:00:36 Vlan200
00:00:40 Vlan100
Dead Time Interface
00:00:31 Vlan200
00:00:39 Vlan100
00:00:37 Vlan200
Dead Time Interface
00:00:34 Vlan100
00:00:34 Vlan200
00:00:32 Vlan100
226
Instance ID
0
0
0
Instance ID
0
0
0
Instance ID
0
0
0