Table of Contents
Advertisement
Scan adaptation
The scanning can be switch by turning the Horizontal and Vertical scan connectors
and the convergence connectors.
To change the scanning, it is necessary to open the projector top cover and to rotate
the chassis.
For opening the projector's top cover, see Getting access to controls.
WARNING
TURN OFF PROJECTOR AND UNPLUG THE POWER CORD BEFORE
CHANGING THE SCAN DIRECTION.
Getting access to the scan connectors and the convergence connectors.
- Open the top cover and to remove it, see Getting access to controls.
- To open the chassis, loosen both indicated retaining screws
Turn the chassis to the front of the projector until it grips in its locks.
4-4
COMM PORT
(800 peripherals) REMOTE
RS232 IN
RS232 OUT
INSTALLATION SET UP
S-VIDEO
R
G(S)
B
S
VIDEO
5975248 BARCOVISION 701 MULTIMEDIA 070597
Advertisement
Table of Contents
