APPENDIX B : G2 ADJUSTMENT
G2 adjustment
Enter the adjustment mode by pressing
ADJUST and highlight Service. Press
ENTER to start up the service mode.
Highlight 'Common settings' and press
ENTER.
Highlight G2 adjust and press EN-
TER.
A safety notice will be displayed to
warn the operator.
5975248 BARCOVISION 701 MULTIMEDIA 070597
ADJUSTMENT MODE
Select a path from
below:
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Select with
then <ENTER>
<EXIT> to return
ENTER starts up the service mode.
EXIT returns to operational mode.
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with
then <ENTER>
<EXIT> to return.
ENTER starts up the Common settings
menu.
EXIT returns to the adjustment mode
menu.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
Select with
then <ENTER>
<EXIT> to return.
source 1
or
or
or
B-1