Table of Contents
Advertisement
INSTALLATION ADJUSTMENTS
Press ENTER to activate the raster on
the Red CRT faceplate.
Shift the raster with the control disk
until the raster is centered in the mid-
dle of the CRT faceplate.
Press ENTER to activate the raster on
the Blue CRT faceplate.
Shift the blue raster with the control
disk until the raster is centered on the
CRT faceplate.
Press ENTER to continue with the CRT
projection angle adjustment
5975248 BARCOVISION 701 MULTIMEDIA 070597
correct raster position
wrong raster position
ENTER continues to CRT Projection
angle Adjustment.
EXIT returns to Optical focusing.
ADJUST returns to operational mode.
7-13
Advertisement
Table of Contents
