Table of Contents
Advertisement
Installation set-up
Scan Adaptation
The scan switches must be placed in the correct position which corresponds to the desired scanning configuration.
To change the scanning, it is necessary to remove the projector top cover and to open the protection plate.
For opening the projector's top cover, see 'Access to controls'.
Gaining access to the scan switches
⊇ Open the top cover and remove it from
the projector (see p.4-1);
⊄ Loosen the 3 lock screws;
⊂ Remove the 3 retaining screws on each
side of the cover plate;
Í Remove the fixation screw nearby the
fan;
∈ Open the protection plate and pivot it
forward (toward lenses).
4-2
All manuals and user guides at all-guides.com
WARNING !
TURN OFF PROJECTOR AND UNPLUG THE POWER
CORD BEFORE CHANGING THE SCAN DIRECTION.
5975638 BARCOGRAPHICS 1209s 010797
Advertisement
Table of Contents
