Table of Contents
Advertisement
Installation mode start up
It will be necessary to perform several mechanical adjustments while in the
installation mode. Remove the top cover in order to gain access to the adjustment
points (see Access to controls).
Two possible ways to enter the installation mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General
access menu.
Use the control disk to high-
light enter ADJUST and press
ENTER.
menu will be displayed.
7-4
The path selection
INSTALLATION ADJUSTMENTS
ADJUST
STANDBY
GENERAL ACCESS
3
4
1
2
Enter ADJUST
Select with
then <ENTER>.
<EXIT> to return
5975248 BARCOVISION 701 MULTIMEDIA 070597
EXIT
ENTER
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
,
or
Advertisement
Table of Contents
