Table of Contents
Advertisement
APPENDIX B : G2 ADJUSTMENT
Switch ABL to OFF by pressing ENTER and adjust the G2 control until the raster
brightness looks the same as when the ABL function is ON.
Check the correct raster adjustment by pressing ENTER to toggle ABL to ON.
Repeat these steps if necessary.
Continue with the other colors. Use the right or left arrow key to select the next
color.
Note : The best result is obtained in a completly dark room or by looking into the
lenses, but be aware that brightness and contrast are on a high level.
5975248 BARCOVISION 701 MULTIMEDIA 070597
B-3
Advertisement
Table of Contents
