Table of Contents
Advertisement
If you are qualified, press ENTER to
continue with the G2 adjustment, oth-
erwise press EXIT to return to the
service menu.
If ENTER is pressed, the G2 menu will
be displayed.
Open the top cover to reach the G2 controls and adjust these G2 controls for red,
blue and green separatly.
The controller automatically increases brightness and contrast until the raster
behind the displayed text becomes visible.
Look to the projected image and observe the raster behind the image while the ABL
function is ON.
B-2
APPENDIX B : G2 ADJUSTMENT
RISK OF ELECTRICAL SHOCK
G2 ADJUSTMENT SHOULD BE
PERFORMED
BY BARCO PERSONNEL,
OR BARCO AUTHORIZED
DEALERS.
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE, OR
IF NOT, <EXIT> TO RETURN.
Select color with
<ENTER> to toggle ABL
<EXIT> to return
Loosen screws and move the cover plate
to the left to access the G2 controls.
Cover the G2 controls again after alignment.
G2 Adjustments
5975248 BARCOVISION 701 MULTIMEDIA 070597
SAFETY
NOTICE
G2 ADJUSTMENT
RED
ABL : ON
or
Red
Green
Blue
131
Advertisement
Table of Contents
