How To Install The Projector; Scan Adaptation; Access To The Scan Controls - Barco R9002380 Installation Manual

Installation Guidelines

How to install the projector?

Ceiling mount or table mount?
To install the projector, apply always the BARCO kits which are specially designed for this function.
BARCO ceiling support.
Always use the BARCO ceiling support to attach your projector to the ceiling. (BARCO order number : R9827990)
The installation instruction for this support is enclosed in the packet of the set.
BARCO projection table.
Height adaptable projection table provides a stable stand for your projector, and makes it possible to adapt the projector perfectly
to the local requirements. (BARCO order number R9827740).

Scan Adaptation

Access to the scan controls

To gain access, handle as follow :
1 Turn both lock screws with a screwdriver or a coin counter clockwise (image 1).
2 Lift up and pivot the top cover (image 1).
3 Support the top cover with the hand, no support is incorporated.
During some installations it will become handy to remove the top cover totally.
Therefore,
a. pivote the top cover ± 60° (image 2)
b. push the top cover to the front side of the projector until it jumps out of its hinges.
c. Turn the top cover till 90° and lift it up.
image 1
image 2
3-4 5976067 BARCOCINE 7 151299