Exiting Programming Mode; Entering User Programming Mode; Time And Date Menu - GE 60-960-95 Installation Instructions Manual

Output Text (Output 1-1120, Output 2-1121)
Use the following guidelines to "name" onboard outputs:
• Use the item numbers listed in "Appendix B, Table B2" for char-
acters and words.
• If a desired word does not appear in Table B2, create it using the
characters (custom text).
• When using words from Table B2, spaces between them appear
automatically. When using characters from Table B2 to create
words, you must reserve an item number for a 'space' after the
word.
• Each character or word uses up one item number. For example, a
word from the list counts as one item number. A created word
(such as BOY'S) counts as six item numbers—4 letters, 1 apos-
trophe, and 1 space.
• Only 16 item numbers are allowed for each output name, so plan
ahead before programming output text. You may need to abbrevi-
ate words to avoid running out of item numbers.
Note
If you want to configure an output for user Output Control you must use the
Output Text feature to name the output. If no Output Text is programmed,
Output Control will not function for that output.
Note
Setting the time and date is
important for accurate track-
ing of system events stored
in the event buffer.
55

Exiting Programming Mode

After all installer/dealer programming is completed, use the following procedure to exit program-
ming mode.
¾
To exit programming mode:
1. Press * until the display shows
2. Press A or B until the display shows
3. Press # and the touchpad displays the

Entering User Programming Mode

The user programming mode lets you view system version information and program the follow-
ing system settings:
• Time and Date
• User Codes
• Options
• Set Up Schedules
• Attach Schedules to Events
• Energy Saver
• Attach Lights to Sensors
• System Version
You can enter user programming from an alphanumeric or fixed display touchpad by using the
system or partition master code. The default system master code is 1234.
¾
To enter user-programming mode:
Š
Press 9 + CODE. The display shows

Time and Date Menu

The panel uses a global clock and calendar for time and date. Alphanumeric touchpads display
the panel time and date whenever the system is disarmed.
The menu lets you set this clock and calendar. The following procedures tell you
TIME AND DATE
how.
Onboard Options-Output Text-Output 1, 2 (Default
¾
To program Output Text:
1. With the display showing
press # then press B twice and the display shows
.
OUTPUT TEXT
2. Press # and the display shows
3. Press # and the display shows:
. Where is the first character or word loca-
ITEM 0
tion and is the character or word number.
0
4. Enter the number of the desired character or word,
or scroll through the numbers by pressing B (for-
ward) or A (backward). If you make a mistake,
simply enter the correct number or continue scroll-
ing through choices.
5. Press # to accept the displayed choice and the dis-
play shows:
OUTPUT 1 ITEM 1 0 -.
6. Repeat steps 4 and 5 as needed to complete the
output name.
7. Press * after entering the last character or word
number. The display shows the complete text
name. For example:
.
SYSTEM PROGRAMMING
EXIT PROGRAMMING READY
.
TIME AND DATE
.
TIME AND DATE
= none)
,
ONBOARD OPTIONS
.
OUTPUT 1
OUTPUT 1 ITEM 0 0 -
.
OUTPUT 1 GARAGE DOOR
.
Concord Ultra