Identify Panel Components; Installing Antennas - GE 60-960-95 Installation Instructions Manual

Identify Panel
Components
9
SuperBus 2000
Transceiver
Phone Interface/
Voice Module
Before installing devices and making wiring connections, familiarize yourself with the main
panel components. Figure 3 shows the three main panel components: the circuit board, trans-
ceiver and phone interface/voice module.
Panel Circuit Board
Backup Battery Leads
Power Line Carrier Card
Programming Touchpad
Header
Terminal Strip
Terminal Strip

Installing Antennas

Install the antennas (included with panel) through the holes in the panel cabinet and into the
inside terminal of each antenna terminal block on the SuperBus 2000 Transceiver (see Figure 4).
Knockout
Knockout
Mounting
Holes
Figure 2. Mounting the Panel
Snapcard
Header
Power LED
Phone
Supervision
Card
Phone Interface/Voice Module
Status LED
DIP Switches
Figure 3. Panel Components
Mounting
Hole
Panel Circuit Board
(under Transceiver)
Transceiver
Antenna Terminal
Blocks
Status LED
Terminal Strip
Concord Ultra