GE 60-960-95 Installation Instructions Manual page 62

Direct Bypassing
(030nnn1 where nnn=user
number 00-229)
This setting determines whether or
not a specific user code provides
access to the "bypass sensors" fea-
ture. Set this feature to "on" for all
users who need to be able to
bypass sensors.
Remote Access (030nnn2
where nnn=user number
00-229)
This setting determines whether or
not the user can access the panel
from a remote phone (a phone
located off the premises).
Partition Jump (030nnn3
where nnn=user number
00-229)
This setting determines whether or
not a specific user code can access
one or both partitions. When this
is set to on, the user can access
both partitions.
System Tests (030nnn4
where nnn=user number
00-229)
This setting determines whether or
not a specific user code provides
access to the phone and sensor
tests. Set this feature to "on" for
all users who need to be able to
conduct phone and sensor tests.
57
¾
To turn user code Direct Bypassing off or on:
1. With the display showing
.
CODES
2. Press # and the display shows
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. Press A or B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting. Press # and the display
shows the new setting.
¾
To turn user code Remote Access off or on:
1. With the display showing
.
CODES
2. Press # and the display shows
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. Press B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting.
6. Press # and the display shows the new setting.
¾
To turn user code Partition Jump off or on:
1. With the display showing
.
CODES
2. Press # and the display shows
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. Press B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting.
6. Press # and the display shows the new setting.
¾
To turn user code System Tests off or on:
1. With the display showing
.
CODES
and
2. Press # the display shows
3. Press A or B to select the desired user number, then press #. The display shows
nnn - nnnn.
4. Press A or B until the display shows
5. Press 1 (off) or 2 (on). The display flashes the entered setting.
6. Press # and the display shows the new setting.
User Codes-Reg. User Codes-User NNN (Default = off)
, press # and the display shows
USER CODES
nnn (first available user number).
USER
DIRECT BYPASSING OFF
User Codes-Reg. User Codes-User NNN (Default = off)
, press # and the display shows
USER CODES
nn (first available user number).
USER
/
REMOTE ACCESS ON
User Codes-Reg. User Codes-User NNN (Default = off)
, press # and the display shows
USER CODES
nnn (first available user number).
USER
PARTITION JUMP OFF
User Codes-Reg. User Codes-User NNN (Default = off)
, press # and the display shows
USER CODES
nnn (first available user number).
USER
SYSTEM TESTS OFF
REGULAR USER
/ (current setting).
ON
REGULAR USER
(current setting).
OFF
REGULAR USER
/ (current setting).
ON
REGULAR USER
/ (current setting).
ON
Concord Ultra
USER
USER
USER
USER