GE 60-960-95 Installation Instructions Manual page 39

Pager Delay (02008)
This setting determines how long a report is delayed to a
pager, after the panel dials the pager number.
Note
The Pager Delay time should not be set below 5 seconds,
unless absolutely necessary.
Call Wait Cancel (02009)
This feature lets you set up a dialing prefix to disable the call waiting feature
before the panel makes its first dialing attempt to any programmed central
monitoring station or downloader phone number. The prefix can be up to
eight digits.
To enter pauses, press C.
To enter *, press and hold 7 for one second.
To enter #, press and hold 9 for one second.
DO NOT change this option from its default if the customer doesn't
!
have call waiting. Verify with the customer that they have call waiting
with their phone service provider before changing this option from its
default. Changing this option from its default without call waiting
will prohibit the panel from calling the central station.
Caution
Dial Tone Detect (02010)
When this setting is on, the panel begins dialing as
soon as it detects a dial tone. When this feature is
off, the panel begins dialing a few seconds after
seizing the phone line.
Note
There is no Dial Tone Detect on the last dialing
attempt.
Local Phone Control (partition 1: 0210,
partition 2: 0220)
When this feature is on, the panel can be accessed
from a phone on the premises.
Remote Access (partition 1: 0211, par-
tition 2: 0221)
When this setting is on, the panel can be accessed
from an off-site phone.
Concord Ultra
¾
To set up Dial Tone Detect:
1. With the display showing
ting), press 1 (off) or 2 (on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
The following sections describe the phone option settings that appear under
A Phone Interface/Voice module must be installed for the system to use the settings under
.
OPTIONS— PARTITION 1-2
¾
To set up Local Phone Control:
1. With the display showing
ting), press 1 (off) or 2 (on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
¾
To turn Remote Access off or on:
1. With the display showing
press 1 (off) or 2 (on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phone Options-Global (Default = 15 sec.)
¾
To set the Pager Delay time:
1. With the display showing
ting), enter a delay time (0–30). The display flashes the
entered setting.
2. Press # and the display shows the new setting.
Phone Options-Global (Default = none)
¾
To set up Call Wait Cancel:
1. With the display showing
CEL __
desired prefix. The display flashes the
entered setting.
2. Press # and the display shows the new set-
ting.
¾
To delete the Call Wait Cancel prefix:
1. With the display showing
CEL __
Phone Options-Global (Default = on)
DIAL TONE DETECT OFF/ON
Phone Options-Partition 1-2 (Default = on)
LOCAL PHONE CTRL OFF/ON
Phone Options-Partition 1-2 (Default = on)
REMOTE ACCESS OFF/ON
(current set-
PAGER DELAY nn SECS
CALL WAIT CAN-
(or current setting), enter the
CALL WAIT CAN-
(or current setting), press D.
(current set-
PARTITION 1-2
(current set-
(current setting),
.
PHONE
34