Touchpad Options Menu - GE 60-960-95 Installation Instructions Manual

House Code (partition 1: 0401, partition 2:
0411)
This setting enables X10 controlled lights to work in a
selected partition without interfering with the X10 controlled
lights of the other partition.
After setting the panel house code for each partition, you
must set the X10 controlled lights for that partition to the
same house code. The letter that appears automatically after
the house code number indicates the necessary HOUSE dial
setting for X10 modules in that partition.
Latchkey Zones (0500)
This setting defines the range of keychain touchpads that will
function as a latchkey user. The value entered in this section
can be any valid zone number. When a zone number is
entered, all zones at or below that zone number will function
as a latchkey user. For example, if 5 is entered, any keychain
touchpads learned into zones 1–5 will be latchkey users and
all others (6–96) will not.
Fire Panic (partition 1: 0510, partition 2: 0520)
This setting determines whether touchpad fire panic buttons
are enabled (on) or disabled (off).
Aux. Panic (partition 1: 0511, partition 2: 0521)
This setting determines whether touchpad auxiliary panic
buttons are enabled (on) or disabled (off).
Police Panic (partition 1: 0512, partition 2: 0522)
This setting determines whether touchpad police panic buttons
are enabled (on) or disabled (off).
39

Touchpad Options Menu

The menu lets you set up touchpad panic and arming operation. The follow-
TOUCHPAD OPTIONS
ing section describes the touchpad option settings that appear under
The following sections describe the touchpad option settings that appear under
Light Control-Partition 1-2 (Defaults: partition 1 = 01-B,
¾
To set the House Code:
1. With the desired partition selected, press A or B until the
display shows
HOUSE CODE nn-x
2. Enter the desired number (1–255). The display flashes the
entered number.
3. Press # and the display shows the new house code.
Touchpad Options-Global (Default = none)
¾
To set the number of Latchkey Zones:
1. With the display showing
setting), enter the desired number of latchkey zones (1–96).
The display flashes the entered setting.
2. Press # and the display shows the new setting.
¾
To delete/disable Latchkey Zones:
1. With the display showing
setting), press D.
Touchpad Options-Partition 1-2 (Default = on)
¾
To change the Fire Panic setting:
1. With the display showing
ting), press 1 (off) or 2 (on). The display flashes the entered
setting.
2. Press # and the display shows the new setting.
Touchpad Options-Partition 1-2 (Default = on)
¾
To change the Auxiliary Panic setting:
1. With the display showing
rent setting), press 1 (off) or 2 (on). The display flashes the
entered setting.
2. Press # and the display shows the new setting.
Touchpad Options-Partition 1-2 (Default = on)
¾
To change the Police Panic setting:
1. With the display showing
rent setting), press 1 (off) or 2 (on). The display
flashes the entered setting.
2. Press # and the display shows the new setting.
partition 2 = 02-C)
(current setting).
.
GLOBAL
(current
LATCHKEY ZONES nnn
(current
LATCHKEY ZONES nnn
PARTITION 1-2
(current set-
FIRE PANIC OFF/ON
(cur-
AUXILIARY PANIC OFF/ON
POLICE PANIC OFF/ON
Concord Ultra
.
(cur-