GE 60-960-95 Installation Instructions Manual page 36

Exception Rpts (pager 1: 0133, pager 2: 0143, pager 3:
0153, pager 4: 0163, pager 5: 0173)
This setting determines whether the panel reports to a pager if the system
is not armed or disarmed at the specified schedule times, if open/close
reports are turned on.
Open/Close Rpts (pager 1: 0134, pager 2: 0144, pager 3:
0154, pager 4: 0164, pager 5: 0174)
This setting determines whether opening and closing reports are sent to a
pager. When turned on, the panel sends a closing report when the system
is armed and an opening report when the system is disarmed.
Note
To use this feature, the opening reports and closing reports settings under the
menu must be turned on for that partition.
REPORTING
Latchkey Rpts (pager 1: 0135, pager 2: 0145, pager 3:
0155, pager 4: 0165, pager 5: 0175)
This setting determines whether the panel reports to a pager when the
system is armed or disarmed, according to latchkey time scheduling.
Streamlining (pager 1: 0136, pager 2: 0146, pager 3:
0156, pager 4: 0166, pager 5: 0176)
This setting determines whether the panel includes (off) or excludes (on)
the account number when reporting to a pager.
Ptn Assignment (pager 1: 0137, pager 2: 0147,
pager 3: 0157, pager 4: 0167, pager 5: 0177)
This setting determines the partition that reports to a pager.
Both partitions can be assigned to report to a single pager.
31
The following describes how to program the phone settings that appear under
.
PHONE
Phones-Pager Phone 1-5 (Default = off)
¾
To turn Exception Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phones-Pager Phone 1-5 (Default = off)
¾
To turn Opening/Closing Reports off or on:
1.
With the display showing
(current setting), press
OFF/ON
The display flashes the entered setting.
2. # and the display shows the new setting.
Press
Phones-Pager Phone 1-5 (Default = on)
¾
To turn Latchkey reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phones-Pager Phone 1-5 (Default = on)
¾
To turn Streamlining off or on:
1. With the display showing
(current setting), press 1 (off) or 2 (on).
ON
The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phones-Pager Phone 1-5 (Default = 1)
¾
To set up Partition Assignments for pager reporting:
1. With the display showing
rent setting), press 1 or 2 to select partition 1 or 2 (press
1 and 2 to select both partition 1 and 2). The display
flashes the entered setting.
2. Press # and the display shows the new setting.
EXCEPTION RPTS
OPEN/CLOSE RPTS
1 (off) or 2 (on).
LATCHKEY RPTS
STREAMLINING OFF/
(cur-
PTN ASSIGNMENT 1/2/12
DOWNLOADER
Concord Ultra