Vertical Lines Appear In Scanned Images - Fujitsu fi-6670 Operator's Manual

Chapter 7 Troubleshooting

Vertical lines appear in scanned images.

Did you scan the document from the flatbed?
(Flatbed type)
NO
Are the upper/lower glasses and rollers inside the ADF
dirty?
NO
Is there any debris (paper powder or dust) on the docu-
ment?
NO
Clean the Document Bed of the Flatbed.
For how to clean the Document Bed, refer to
YES
Type Only)" (on page 100).
Clean the upper/lower glasses and rollers inside the ADF.
For how to clean the glasses and rollers, refer to
YES
95).
Remove the debris from the document.
Such debris on the document may be transferred onto the upper/lower glasses
YES
and rollers inside the ADF or the Document Bed of the Flatbed, producing vertical
lines in the scanned images.
If you cannot solve the problem after taking the measures above, check the items
shown in "7.4 Before Contacting Your Dealer or Scanner Service Provider" (on
page 130), and then contact the dealer where you purchased the scanner or an
authorized FUJITSU scanner service provider.
"5.3 Cleaning the Flatbed (Flatbed
"5.2 Cleaning the ADF" (on page
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
121