Settings Related To Multifeed Detection; Multifeed Detection - Fujitsu fi-6670 Operator's Manual

Chapter 8 Operational Settings

8.5 Settings Related to Multifeed Detection

Multifeed Detection

A "multifeed" is a feeding error that occurs when two or more
sheets in the ADF paper chute are fed simultaneously into the
scanner.
If you continue scanning document without knowing this multi-
feed error, you could skip some of important data while
scanning the document.
This scanner has the Multifeed Detection function to prevent
such troubles.
With the Multifeed Detection enabled, the scanner indicates
an error message and halts the scanning immediately at a
multifeed error.
Note that the Multifeed Detection is not available for the range
about 30 mm from the leading edge of document.
1
Start up the Software Operation Panel.
Refer to "8.1 Starting Up the Software Operation Panel" (on page
134).
2
From the tree listing on the left, select [Device Setting 2]
[Multifeed].
3
Select one of the following detection methods.
Detection Method
None Does not detect multifeeds.
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables
Description
Trouble-
shooting
Operational
Settings
Appendix
Glossary
TOP
Contents
Index
159