Overscan Control - Fujitsu fi-6670 Operator's Manual

Chapter 8 Operational Settings

8.8 Overscan Control

Specify [Expand] when you use Overscan and the image is
partially missing due to an abnormal skew.
Added margin
missing
Added margin
When parts of the image are
missing
Configure the settings for Overscan Control as follows.
1
Start up the Software Operation Panel.
Refer to "8.1 Starting Up the Software Operation Panel" (on page
134).
When [Expand] is specified
2
Select [Device Setting 2] from left side list in the window,
select [Overscan Control] from its lower level, then select
[Expand].
This setting does NOT appear when Kofax VRS is used.
• The scanning speed slows down when this function is
enabled.
• It is recommended to specify the maximum size of
scannable documents.
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
168