Consumables; Trouble; Shooting; Operational - Fujitsu fi-6670 Operator's Manual

Appendix
Item
Scanner model
Capacity of ADF
Optical resolution
Output resolution Binary (monochrome)
Grayscale
Color
Grayscale level
Halftone pattern
Interface (*6) (*7)
Other function
*1 : For scanning with the ADF only. With the Flatbed, there is no minimum size limitation.
*2 : For a document longer than 864 mm or 34.02 inches, you need to specify a resolution of 200 dpi or less.
*3 : Values measured when using the ADF. There is no limit of paper weight when document is scanned with the Flatbed.
*4 : The maximum hardware limitation. Software processing time such as data transfer time is added to the actual scanning time.
*5 : The maximum capacity varies depending on the paper weight. For details, refer to
*6 : You cannot use both SCSI and USB 2.0/1.1 interfaces at the same time.
*7 : You cannot connect multiple computers to the scanner using each type of interface cables at the same time.
*8 : If you connect the scanner with USB 2.0, it is required that the USB port and the Hub are compliant with USB2.0. The scanning speed may slow down
when you connect the scanner with USB1.1.
Specification
fi-6670 fi-6770
200 sheets
600 dpi
50 to 600 dpi
50 to 600 dpi
50 to 600 dpi
8 bits per color
Dither/error diffusion
USB2.0/1.1 (*8)
Ultra SCSI
Hardware real-time JPEG compression
"2.2 ADF-Loaded Documents" (on
Note
fi-6750S --
A4/Letter,
2
80 g/m (20 lb) (*5)
--
Scalable in 1 dpi
increments
Scalable in 1 dpi
increments
Scalable in 1 dpi
increments
10 bits per color for
internal processing
--
B type
-- Shielded 50-pin
high-density type
Grayscale/color
page42).
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care

Consumables

Trouble-

shooting

Operational

Settings
Appendix
Glossary
172