Setting A Non-Multifeed-Detection Range [Intelligent Multifeed Function] - Fujitsu fi-6670 Operator's Manual

Chapter 8 Operational Settings
Setting A Non-Multifeed-Detection Range
[Intelligent Multifeed Function]
You can bypass multifeed detection by letting the scanner
remembering the pattern (size and location) of glued paper on
the document.
Note that you need to select "Check Overlapping" beforehand
by referring to "Multifeed Detection" (on page
1
Start up the Software Operation Panel.
Refer to "8.1 Starting Up the Software Operation Panel" (on page
134).
2
From the tree listing on the left, select [Device Setting 2]
[Intelligent Multifeed Function].
3
Select a desired operation mode, and then click the [OK]
button.
Operation Mode
Manual Mode
159).
Auto Mode 1
Auto Mode 2
4
Select whether to let the scanner memorize the multifeed
pattern at power-off or not on the [Remember multifeed
pattern at power-off]. If you select [Remember], you can
use the multifeed pattern which is memorized before
power-off even after re-turning the power on. (Eight
patterns at power-off can be memorized.)
To how to work further with the Intelligent Multifeed function, refer to
"Bypassing Multifeed Detection for a Fixed Format" (on page
Description
The scanner stops scanning each time a multi-
feed error is detected. You can resume
scanning after reloading the multifed
document.
The scanner does not remember the size and
location of paper glued on the document.
The scanner remembers the size and location
of paper glued on the document when a multi-
feed error occurs and you reload the multifed
document on the ADF Paper Chute.
Multifeed Detection for this pattern is disabled
from the next scanning on.
The scanner remembers the size of paper
glued on the document when a multifeed error
occurs and you reload the multifed document
on the ADF Paper Chute.
Multifeed Detection for this pattern is disabled
from the next scanning on.
Selecting the [Clear overlap pattern] checkbox clears the
overlapping pattern (size and/or location) memorized in
Auto Mode.
If you change the current mode to another, the remem-
bered pattern (size and/or location) will automatically be
cleared.
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
88).
164