Chapter 5 Daily Care - Fujitsu fi-6670 Operator's Manual

Chapter 5 Daily Care

This chapter describes how to clean the scanner.
• When operating the scanner, the glasses inside the ADF
AUTION
become very hot.
• Before you clean the inside of the scanner, turn off its power
and unplug the power cable from the power outlet. Wait for at
least 15 minutes for the ADF glasses to cool down.
• Before you clean the Feed Rollers and Eject Rollers, turn off
the power and unplug the AC adapter from the power outlet.
Wait for at least 15 minutes, then turn on the power again.
ARNI N G Do not use any aerosol sprays or alcohol based sprays to clean
the scanner. Dust blown up by strong air from the spray may
enter the inside of the scanner. This may cause the scanner to
fail or malfunction.
Sparks caused by static electricity, generated when blowing off
dust and dirt from the outside of the scanner, may cause a fire.
5.1 Cleaning Materials and Locations Requiring Cleaning...........93
5.2 Cleaning the ADF ...................................................................95
5.3 Cleaning the Flatbed (Flatbed Type Only) ............................100
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary