Scanning A Document Longer Than A3 Size; Trouble; Shooting; Operational - Fujitsu fi-6670 Operator's Manual

Chapter 4 Various Documents
3
Place the whole document on the ADF Paper Chute, and
then adjust the Side Guides so that they lightly touch the
widest sheets of the document.
When loading a small-size document on the
AUTION
ADF Paper Chute, be careful not to touch the
hood for the Chute Roller. Touching the hood
during scanning opens it, and may catch your
finger in.
4
From ScandAll PRO, perform a scan.
For how to perform a scan, refer to "ScandAll PRO V2.0 User's
Guide".

Scanning A Document Longer Than A3 Size

1
Load a target document on the ADF Paper Chute.
For how to load documents on the ADF Paper Chute, refer to
Loading Documents on the ADF" (on page
When scanning a document longer than A3 size, pull out
the Paper Chute Extension and the Stacker Extension to
their maximum. Here, do not raise the Stoppers.
2
Start up ScandAll PRO, and then open the [TWAIN Driver
(32)] dialog box.
For how to open the [TWAIN Driver (32)] dialog box, refer to "ScandAll
PRO V2.0 User's Guide".
3
Select [Long page (Front Side)] or [Long page (Duplex)]
from [Scan Type].
Select [Long page (Front Side)] for single-sided scanning; [Long page
(Duplex)] for double-sided scanning.
⇒
The [Long Page Paper Size Setting] dialog box appears.
The [Long Page Paper Size Setting] dialog box appears
for the fi-6670, or fi-6770 only.
Contents
Introduction
"2.1
Scanner
39).
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables

Trouble-

shooting

Operational

Settings

Appendix
Glossary
TOP
Index
65