Download  Print this page

Fujitsu fi-6670(A) Consumable Replacement And Cleaning Instructions

Hide thumbs

Advertisement

fi-6670(A) & fi-6770(A) C
R
C
I
ONSUMABLE
EPLACEMENT AND
LEANING
NSTRUCTIONS
fi-6670(A) & fi-6770(A) C
ONSUMABLE
R
C
I
EPLACEMENT AND
LEANING
NSTRUCTIONS
CG00002-015501C
1

Advertisement

Table of Contents
loading

  Also See for Fujitsu fi-6670(A)

  Related Manuals for Fujitsu fi-6670(A)

  Summary of Contents for Fujitsu fi-6670(A)

  • Page 1 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS CG00002-015501C...
  • Page 2 & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ONSUMABLES Description Life Fujitsu P/N Brake Roller 250,000 PA03576-K010 Pick Rollers 250,000 PA03338-K011 Brake Roller Pick Rollers Note: NCR or Carbonless paper has chemical composition which damages the Brake Roller and Pick Rollers. Cleaning of these items will be needed more frequently to avoid feed problems if scanning a large quantity of this type of paper.
  • Page 3 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE RAKE OLLER A worn out or improperly installed Brake Roller will cause multiple feeds or paper jams. The Brake Roller has an approximate life of 250,000 pages. If NCR or carbonless paper is scanned the life span of the Brake Roller may be decreased by as much as 50%.
  • Page 4 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE RAKE OLLER CONT • Lift the Brake Roller out of the scanner. • Pull the shaft out of the Brake Roller. • Install the shaft into the new Brake Roller. Note: When installing the shaft into the new Brake Roller, make sure to align the tabs in the roller shaft with the slots on the collar of the Brake...
  • Page 5 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE RAKE OLLER CONT • Place the new Brake Roller into the Brake Roller Cover, making sure to align the flat area of the Brake Roller shaft in the guide groove of the Brake Roller Cover.
  • Page 6: Replacing The Pick Rollers

    fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE OLLERS Worn out, defective, or improperly installed Pick Rollers will cause mis- feeds and paper jams. The Pick Rollers have an approximate life of 250,000 pages. If NCR or carbonless paper is scanned, the life span of the Pick Rollers will be decreased by as much as 50%.
  • Page 7 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE OLLERS CONT • Install the new Separation Roller onto the shaft. Make sure to align the slot in the roller collar with the screw in the shaft. • Install the new Pick Roller onto the shaft.
  • Page 8 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ESETTING THE ONSUMABLE OUNTERS After the Brake Roller and the Pick Rollers have been replaced it is important to reset the scanner consumable counters. These counters will keep track of how many pages have been scanned since the last time the consumables were replaced.
  • Page 9 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ESETTING THE ONSUMABLE OUNTERS CONT • The Device Setting Screen below is displayed. • Press the C button next to the consumable that has been LEAR replaced. • Once the C buttons are pressed, press the OK button to clear the LEAR counters.
  • Page 10: Cleaning Material

    fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING OCATIONS AND REQUENCIES Location Tools Frequency Cleaning Sheets Every 10,000 Sheets Pick Rollers & Brake Roller Pick Arm Cloth & Isopropyl Alcohol Every 20,000 Sheets Urethane Feed Rollers & Cloth and F1 Cleaner Every 20,000 Sheets Plastic Feed Rollers Transport Path...
  • Page 11 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE APER ATH WITH THE LEANING APER The Cleaning Paper is designed to remove only loose paper dust and ink from the rollers. Use them approximately every 10,000 sheets scanned. Using the cleaning paper does not take the place of the more complete cleanings described later in this section •...
  • Page 12 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE APER ATH WITH THE LEANING APER CONT • Close the ADF and turn the scanner on. The Cleaning Paper will be automatically fed through the ADF. • Repeat the above steps, aligning the Cleaning Paper against the opposite Sheet Guide.
  • Page 13: Cleaning The Adf

    fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE It is very important to clean the scanner feed components on a regular basis to avoid paper feeding problems. These items should be cleaned at least every 20,000 sheets. Daily cleaning may be required if carbonless paper or paper with large amounts of toner and ink are fed.
  • Page 14 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ADF ( LEANING THE CONT LEANING THE OLLERS Dirty Pick Rollers can cause mis-picks, paper jams, and multi-feeds. • Open the Pick Roller Cover Pick Roller and remove the Separation Roller and the Pick Roller. Separation Roller •...
  • Page 15 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ADF ( LEANING THE CONT ADF R LEANING THE OLLERS Dirty ADF Rollers will cause frequent jams. • Clean the two sets of Urethane Feed Rollers Urethane Rollers with a lint free cloth moistened with F1 Cleaner or isopropyl alcohol.
  • Page 16 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS (fi-6770) LEANING THE LATBED It is important to keep the Flatbed area clean. A dirty Flatbed Glass can cause spots or unclear images. If there are marks on the Document Holding Pad, these marks can appear on the image when scanning thin sheets of paper.
  • Page 17 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING OTIFICATION The fi-6670 and fi-6770 scanners can be configured to display a cleaning notification on the computer screen. This notification can be configured to display at user selected intervals. This will alert the user to clean the scanner.
  • Page 18 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING OTIFICATION CONT • Click on the S check box. HOW CLEANING INSTRUCTIONS • Select the page interval of when the Cleaning Notification is displayed. 10,000 pages is recommended. Note: More frequent cleaning may be necessary depending on what type of paper is scanned.
  • Page 19 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEARING THE LEANING OUNTER After the scanner is cleaned, the Cleaning Counter should be cleared. • Open the Software Operation Panel. • Press the D option in the left pane. EVICE ETTING •...
  • Page 20 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS...
  • Page 21 FCPA reserves the right to change its service offerings and limited warranty at any time without notice. Fujitsu and the Fujitsu logo are registered trademarks and The Possibilities are Infinite is a trademark of Fujitsu Limited. All other trademarks are the property of their respective owners.
  • Page 22 fi-6670(A) & fi-6770(A) C ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS...

This manual is also suitable for:

Fi-6770aFi-6670Fi-6770