Adjusting The Scanned Document Output Images [Overcrop/Undercrop] - Fujitsu fi-6670 Operator's Manual

Chapter 8 Operational Settings
3
Specify the density of background color.
• Increasing the density level may cause incorrect edge
detection due to some dust in the paper feeding path.
• You cannot enable this setting together with [Scan
Setting for Documents with Tab (Automatic Paper Size
Detection)]. If you enable this setting, the setting for
[Scan Setting for Documents with Tab (Automatic
Paper Size Detection)] will automatically be disabled.
Adjusting the Scanned Document Output Images
[Overcrop/Undercrop]
You can adjust the size of the scanned document output
image detected with the [Automatic Paper Size Detection]
option.
1
Start up the Software Operation Panel.
Refer to "8.1 Starting Up the Software Operation Panel" (on page
134).
2
From the tree listing on the left, select [Device Setting 2]
[Overcrop/Undercrop].
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
156