Device Errors; Various; Documents; Daily Care - Fujitsu fi-6670 Operator's Manual

Chapter 7 Troubleshooting

Device Errors

Device errors require recovery works by support engineers.
They are listed as follows:
■Motor and Optical System Errors
[E] and a number are displayed alternately.
Indica Item
tion
E0 Flatbed motor malfunc-
tion
(Flatbed type only)
E1 Flatbed optical system
malfunction
(Flatbed type only)
Remedy
1 Confirm that the Transfer Lock is
unlocked.
2 Turn the scanner off and on
again.
If the error is still displayed on the
Function Number Display, record
the indicated error code, and
contact the store where you
purchased the scanner or an
authorized FUJITSU scanner
service provider.
Indica Item
tion
E2 Optical system error
(Front-side scanning
thru the ADF)
E3 Optical system error
(Back-side scanning
thru the ADF).
(fi-6670/fi-6770)
E6 Operator panel error
E7 Internal memory error
(EEPROM)
E8 SCSI interface circuit
error
(fi-6670/fi-6770)
E9 Image memory error
■ Overrun Errors
[F] and a number are displayed alternately.
Indica Item
tion
F2 Pick arm error
F4 Background switching
mechanism error
F6 Fan error
F7 Heater error
F8
F9
Remedy
Turn off and on the scanner again.
If the error is still displayed on the
Function Number Display, record
the indicated error code, and
contact the store where you
purchased the scanner or an
authorized FUJITSU scanner
service provider.
Remedy
Turn off and on the scanner again.
If the alarm is still displayed on the
Function Number Display, record
the indicated error code, and
contact the store where you
purchased the scanner or an
authorized FUJITSU scanner
service provider.
TOP
Contents
Index
Introduction
Scanner
Overview
Loading

Documents

Scan
Parameters

Various

Documents

Daily Care

Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
112