Fujitsu fi-6670 Operator's Manual page 139

Chapter 8 Operational Settings
Item Explanation
Pre-pick To give a higher priority to
processing speed, select [Yes], if
not, select [No].
Can also be specified from the
scanner driver's setting dialog box.
Note the setting with the scanner
driver is given a priority.
Document check Selected range: Check this item
area specifica- when limiting the range of detect-
tion for Multifeed ing multifeeds. You can determine
Detection if multifeed detection is enabled or
disabled for the specified area.
Start: Specify the start point of the
check area in length (mm) from the
top edge of the document.
End: Specify the end point of the
check area in length (mm) from the
top edge of the document.
Intelligent Multi- Bypass multifeed detection by
feed Function remembering the pattern (size and
location) of glued paper on the
document.
Note that you need to select
"Check Overlapping" beforehand
by referring to
tion" (on page
Select whether to memorize the
multifeed pattern at power-off or
not.
Selectable Parameters
Yes/No
Check or do not check "Selected range"
Enable/Disable
(when "Selected range" is checked)
0 to 510 mm (in increments of 2 mm)
0 to 510 mm (in increments of 2 mm)
Manual Mode/Auto Mode 1/Auto Mode 2
"Multifeed Detec-
159).
Remember/Do not remember
Default Connection via
SCSI/USB
Connector
Yes: Configurable
No: Not configurable
Yes Yes No
Do not Yes Yes
check
Disable
0 mm
0 mm
Manual Yes Yes
Mode
Do not
remember
TOP
Contents
For connec-
Index
tion via VRS
option:
Introduction
Scanner
Overview
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
139