Table of Contents
Advertisement
[Other] Settings
When you are using the JPEG data compression,
you can record still images.
You can rename the folder which stores a captured
file.
This page can be used during access using
"admin" or "operator".
When the Control Menu is open, click [Viewer
0
Setup] to switch to the Viewer Setup Menu.
Click [Other] to open the Settings screen.
0
When you click the [Apply] button, the current
0
settings are made valid on the viewer and they
are stored in the computer.
Other
.
Folder Name
To change the name of the folder for storing
captured files, enter the folder name.
(When the viewer is installed: "VN-H657")
Exiting Built-in Viewer
Click the [´] button at the right top corner of the
window to exit the viewer.
.
Memo :
When you start the Built-in Viewer the next time,
0
start up Internet Explorer and enter the URL of
the Built-in Viewer into the address bar.
For example, if the IP address of the camera is
192.168.0.2, enter the URL as follows:
http://192.168.0.2/
After the "Security Settings" screen appears,
0
press the [YES] button to proceed.
[Viewer Setup] -[Other] Settings
63
Advertisement
Table of Contents
