Introduction To Kos And Kom - Oce CPS700 Maintenance Manual

Introduction to KOS and KOM

Introduction
Key Operator System (KOS) and Key Operator Maintenance (KOM) are tasks
of the key operator. The key operator has more permissions than the operator.
The key operator can for example change the default settings and provide
maintenance to the Océ CPS700.
The key operator needs the special key operator PIN code to access KOS and
KOM.
Note: Key operator maintenance depends on the agreement between Océ
and the customer.
Types of KOS
The key operator can access the following functions on the operator panel.
KOS editor
KOS adjustments.
The 'KOS editor' refers to the default settings that the key operator can change.
The 'KOS editor' contains the following.
'Workflow'
'Paper/counters'
'Time/date'
'ECO'
'Layout'
'PIN codes'.
The 'KOS adjustments' refer to the print qualities that the key operator can
improve. The 'KOS adjustments' are the following.
'Image enlargement'
'Colour registration'
'OD gradation curves'
'Image registration'.
The key operator can change the settings for the 'KOS editor' and the 'KOS
adjustments' on the operator panel.
8 Océ CPS700 Configuration and maintenance manual