Table of Contents
Advertisement
When to do
Add the toner when the toner icon on the system monitor changes into orange.
Note Attention Caution
Attention:
instructions for the removal of the spilled toner (see Appendix A Safety
information).
How to add the toner
Open the toner cover.
1
Shake the toner bottle well.
2
Put the closed toner bottle upside down on the slider of the matching toner
3
reservoir.
Note:
Every toner reservoir slider has special notches. The slide caps of the
toner bottles have notches that match with the notches of the sliders. This
makes sure that a toner colour can only be filled into the matching reservoir.
Open the slider of the toner reservoir. The slider of the toner reservoir also
4
opens the slide cap of the toner bottle.
Wait until the toner bottle is empty. Close the slider of the toner reservoir. The
5
slider of the toner reservoir also closes the slide cap of the toner bottle.
Note:
Make sure that the toner reservoir is not opened longer than necessary.
Eventually the system stops printing.
Remove the toner bottle.
6
Close the toner cover.
7
The system maintenance
If some toner is spilled, the key operator must follow the
25
Advertisement
Table of Contents
