Oce CPS700 Maintenance Manual page 27

How to add the staples
Pull out the empty staple cartridge.
1
Push the green tab on the stapler frame to the right and lift the metal slider.
2
Use one hand to hold the slider. Use the other hand to remove the staples from
3
the staple path and the anvil.
Release the slider and push the green tab on the stapler frame to the left.
4
Push the new staple cartridge into the stapler.
5
Note: Make sure that the type of the staples is S2.
How to close the stapler
Take the lever and turn the stapler back into the original position.
1
Note: The stapler frame has a spring. Pull the lever of the stapler frame to the
left. Push the stapler completely down and release the lever.
Move the latch to the right and tighten the screw.
2
Close the finisher top cover.
3
Slide the frame to the left.
4
Close the paper compartment door.
5
The system maintenance 27