Oce CPS700 Maintenance Manual page 121

Mains connection Océ CPS700 Never connect the Océ CPS700 to a mains
voltage that deviates from the value as stated on the power-marking label.
The power-marking label is situated on the back of the Océ CPS700 near the
main entrance. If you connect a different mains voltage, contact Customer
Service.
Surroundings
Do not block the ventilation openings of the machine.
Ensure that the machine is placed on a level, horizontal surface of sufficient
strength. See the Océ CPS700 safety data sheet in this appendix for
information about the weight of the equipment.
Ensure there is sufficient space around the machine. This facilitates
reloading materials as well as maintenance.
Do not place the machine in rooms which are subject to excessive vibration.
Do not place the machine in rooms which are too small and insufficiently
ventilated. See the Océ CPS700 safety data sheet in this appendix for
information about space and ventilation requirements.
General
Always use materials recommended by Océ and developed for this Océ
machine. Materials not approved by Océ may result in faults in your
machine.
Do not use the machine when it is emitting unusual sounds. Remove the
plug from the power socket or switch off the fixed connection to the
electricity grid and contact Customer Service.
Safety information 121