Table of Contents
Advertisement
remain active. The key operator must press the keys for 'System manager' ->
'System' -> 'KOM' to enter the KOM mode.
Corrective maintenance. The system stops immediately in the following
cases.
When a KOM item has reached the end of life.
When a paper jam has occurred in the Central Process Group.
KOM is required before you can use the system again. When corrective
maintenance is required, the system stops and the error screen appears.
[12] The error screen
[12] The error screen
When you press the Start key (
Enter the PIN code to start KOM.
Note:
The key for KOM on the bottom of the operator panel is disabled when
the KOM warning icon is off.
The system maintenance
), the dialog box for the PIN code appears.
29
Advertisement
Table of Contents
