Oce CPS700 Maintenance Manual page 113

pinch.
Pull the sheet of paper out of the postfuser.
7
Push the output guide into the postfuser frame. Make sure that the edges of the
8
output guide fit into the holes on the bars of the postfuser frame.
Turn the two handles 90 degrees.
9
Put the output roller into the postfuser. Make sure that the pins on the postfuser
10
fit in the output roller.
Push the output roller down. The output roller must click.
11
C. How to clear a paper jam if the paper juts out from the postfuser at the lower left-hand
side
When the postfuser is closed, turn the red knob on the right-hand side of the
1
postfuser to open the postfuse pinch.
Remove the paper.
2
The system maintenance 113