Table Of Contents - Oce CPS700 Maintenance Manual

Contents
Chapter 1
Introduction
General information 6
About the Océ CPS700 6
Introduction to KOS and KOM 8
Chapter 2
The system configuration
Access the KOS editor 12
Access the KOS adjustments 20
Chapter 3
The system maintenance
Add the supplies 24
Add the toner 24
Add the staples 26
Access the KOM mode 28
About key operator maintenance 28
Refill the fuser oil 32
Replace the waste toner box 37
Replace the intermediate cleaner 42
Replace the pressure roller cleaner 54
Clear the paper jams in the process paper path 66
About the paper jams 66
Clear a paper jam between the paper input section and the paper positioning module
68
Clear a paper jam in the preheater 80
Clear a paper jam between the receiver unit and the postfuser 93
Clear a paper jam in the postfuser 105
Appendix A
Safety information
Instructions for safe use 120
Safety data sheets 122
Contents 3