Clean the scan area
Maintain the flexible scanner
Clean the scan area
Introduction
You need to keep the glass plate clean. A dirty glass plate causes a decreased copy
and scan quality. Clean the glass plate when you have lines on the image that are not
on the original.
Attention: Use Océ cleaner A to get the best results.
Attention: Make sure you do not damage the sensor at the right of the glass
plate.
How to clean the glass plate
Turn off the Océ TDS700 scanner.
1.
Pull the top cover towards you and lift the top cover to open it.
2.
[212]
[212] Open the top cover
344
Chapter 10 Maintain the Océ TDS700