Paper Jam At The Integrated Receiving Tray - Oce TDS700 User Manual

Paper jam at the integrated receiving tray

Paper jam at the integrated receiving tray
Caution: During normal use the fuser must be closed. Only open it to
remove paper after a paper jam. Because of hot surfaces the operator
always has to be cautious and wear heat-protective gloves, when removing
printing material in the fuser section.
How to clear a jam at the integrated receiving tray
Open the manual feeder to release the printing material.
1.
[247]
[247] Manual feed section
Note: If you fail to do so, the OPC drum might get damaged when you remove
jammed material.
Open the cover on the left-hand side of the printer.
2.
Note: Make sure the printer is switched off before you open the fuser section.
378 Chapter 10 Maintain the Océ TDS700