Table of Contents
Advertisement
Positioning the reinforcement knives (optional)
Introduction
Because the knives of the optional reinforcement unit of the folder get sticky from
the glue on the reinforcement tape, they have to be cleaned regularly. You are
recommended to clean the knives each time you have inserted a new tape roll or
when an error in the reinforcement unit has occurred.
Before you can clean the reinforcement knives, you have to place them in such a
position that all the parts that need to be cleaned are accessible. You can do this from
the printer operator panel.
[14]
[14] Cleaning the reinforcement knife
Prepare the reinforcement knives for cleaning
Press the On-line key on the printer operator panel to put the printer off-line. The
1.
message Off-line is displayed in the status window.
Press the left selection key to shift the focus to the Folding menu. A shadow effect
2.
is used to indicate that the focus is set to this menu.
Select the Special option from the Folding menu.
3.
Press the right selection key to activate the Knife option.
4.
The illustration above displays the information on the panel display.
You can now continue to clean the reinforcement knives.
5.
Positioning the reinforcement knives (optional)
55
Advertisement
Table of Contents
