The Océ Tds700 Key Concepts; Printer Configuration - Oce TDS700 User Manual

The Océ TDS700 key concepts
The Océ TDS700 key concepts

Printer configuration

The Océ TDS700 is available in a number of printer configurations, ranging from
two rolls in a single drawer (the minimum configuration) to a maximum of six rolls
with one sheet feeder and four rolls with three sheet feeders. The Océ TDS700
printer can be combined with a flexible colour scanner or a productive black and
white scanner. Also a number of optional features are available, including an
integrated folder, an output delivery tray, paper roll loaders and a paper switch for
supporting customer finishing units.
Copy functionality
The Océ TDS700 offers you a configuration with a flexible colour or a productive
black and white scanner. With these Océ TDS700 scanners a large number of copy
activities can be performed. A wide variety of original and copy related settings are
supported. You can specify particular layout, media, finishing, feeding and quality
enhancement options from the scanner operator panel.
Green key principle
The Océ TDS700 is a very user-friendly system. The scanners, in particular, are very
easy to operate. Basic copy jobs can be performed by simply pressing the green start
key on the scanner operator panel. Only if you want to perform more complex copy
jobs, you have to change the default copy settings with the help of the other settings
on the scanner operator panel. The scanner templates offer you extended ease of use
because you can use them to store preferred combinations of settings.
Scanner templates
Both the flexible colour and the productive black and white scanner offer you a
number of customisable templates for the job settings of a copy or scan job. The
scanner templates allow you to store your preferred job settings. To start a job you
simply select a template on the scanner operator panel and press the green start key.
Templates can be managed in the new Océ TDS700 Power Logic
application.
Integrated Océ TDS700 Power Logic
The Océ TDS700 Power Logic
workflow. Only one application with a transparent and intuitive layout where you
can perform many tasks based on user role defined access. Separate workspaces give
you a full overview and full control on print and scan job management, but also allow
you to manage your scanner templates, stamps, system preferences and network
connectivity settings.
24 Chapter 1 Introduction
®
controller application
®
controller application supports a centralised
®
controller