Installing The Bezel - Gateway E-9525R User Manual

CHAPTER 2: Setting Up Your Server

Installing the bezel

16
Align the mounting screw holes in the server handles with the front
8
mounting nuts, then secure the front in place with two mounting screws
(one on each side).
To install the bezel:
With the server pulled out from the cabinet, align the holes in the handle
1
with the small holes in the mounting brackets on the front side of the
server.
Attach the handles to the sides of the server with two mounting screws
2
on each side.
www.gateway.com
Mounting bracket
Mounting bracket