HP CC487-91209 Fax Manual page 90

1. Start the utility (on the computer or server) to open the main screen.
2. Select the product and click the Configure MFP button on the main screen, and then click the
Send to Fax tab to open the Fax Settings screen.
3. To enable the fax capabilities on the product, select the Enable Fax Send option. To access
Analog-fax settings, select Internal Modem in the Fax Send Method drop-down list. On the
Common Job Settings tab, make any changes to the settings and click the Apply button to
accept the settings. Select the Internal Modem tab to set additional fax settings.
In addition to configuring a single product, you can also configure multiple devices. For more
information about the HP MFP Digital Sending Software Configuration Utility, see the HP MFP Digital
Sending Software User Guide or the HP MFP Digital Sending Software Support Guide.
NOTE: Depending on the capabilities and settings of your fax method, some of these options might
not be available or configurable.
78 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
ENWW