Set The Outgoing Fax Resolution; Original Sides - HP CC487-91209 Fax Manual

Set the outgoing fax resolution

The outgoing fax resolution setting determines the maximum resolution supported by the receiving
fax. The fax accessory uses the highest possible resolution (as limited by this setting) and the
maximum resolution of the receiving fax.
NOTE: Faxes wider than 21.25 cm (8.5 inches) are automatically sent by using standard or fine
resolution, to reduce phone time.
NOTE: The default resolution setting is a lower dpi than previous product model default resolution
settings. For example, previous product models had a default resolution of FINE (200 x 200 dpi).
NOTE: The higher the resolution, the longer the transmission time required.
NOTE: LAN fax settings resolution settings vary by vendor and may differ from the settings listed
below.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Send Settings
●
Default Job Options
●
Resolution
●
3. Touch one of the following resolution settings:
Standard (100 x 200dpi)
●
Fine (200 x 200dpi)
●
Superfine (300 x 300dpi)
●
4. Touch the

Original sides

1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Send Settings
●
Default Job Options
●
Original Sides
●
3. Touch one of the following options:
1-sided
●
2-sided
●
86 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
(default)
Save button.
(default)
Administration button.
Administration icon.
ENWW