Set The Redial Interval; Set Redial-On-Busy; Set Redial-On-No-Answer - HP CC487-91209 Fax Manual

Set the redial interval

The redial interval setting selects the number of minutes between retries if the number dialed is busy
or not answering. Busy can also indicate a communication error.
NOTE: You might observe a redial message on the control panel when both the Redial-on-Busy,
Redial-on-No-Answer, and Redial-on-Error settings are set to off. This occurs when the fax accessory
dials a number, establishes a connection, and then loses the connection. As a result of this error
condition, the fax accessory performs two automatic redial attempts regardless of the redial settings
(the first one at 26,400 bps and, if that fails, a second one at 14,400 bps). During this redial operation,
a message appears on the control panel to indicate that a redial is in progress.
1. On the control panel, scroll to and touch the
menu.
2. Scroll to touch
3. Touch Fax Setup
4. Touch Fax Send Settings
5. Touch the text box to display the keyboard.
6. Enter the value (1–5) and touch OK.
7. Touch Save.

Set redial-on-busy

The redial-on-busy setting selects the number of times (0 through 9) the fax accessory redials a
number when the number is busy. The interval between retries is set by the Redial Interval setting.
1. On the control panel, scroll to and touch the
menu.
2. Scroll to touch
3. Scroll to touch
4. Touch Fax Send Settings
5. Touch the text box to display the keyboard.
6. Enter the value (0–9) and touch OK.
7. Touch Save.

Set redial-on-no-answer

The redial-on-no-answer setting selects the number of times the fax accessory redials if the number
dialed does not answer. The number of retries is either 0 to 1 (used in the U.S.) or 0 to 2, depending
on the country/region setting. The interval between retries is set by the redial interval setting.
1. On the control panel, scroll to and touch the
menu.
2. Scroll to touch
3. Scroll to touch
ENWW
Initial Setup to open the initial setup menu.
to open the fax setup menu.
and use the down arrow key to scroll to
Initial Setup.
Fax Setup.
and use the down arrow key to scroll to
Initial Setup to open the initial setup menu.
Fax Setup to open the fax setup menu.
Administration icon to open the Administration
Redial
Administration icon to open the Administration
Redial On
Administration icon to open the Administration
Interval.
Busy.
Fax settings 17