HP CC487-91209 Fax Manual page 84

4. Pull the formatter straight out of the product to remove it.
5. Remove the fax accessory card from the packaging.
6. Position the port end of the fax PCA (callout 1) in the slot provided in the formatter tray, rotate
the fax PCA down onto the formatter (callout 2), and then push down on the PCS to seat the
PCA into the connector on the formatter (callout 3).
7. Align the formatter to the slot at the rear of the product, and then slide the board into the product.
72 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
ENWW